Commercial Catalog

• Body Construction of A-60 Galvanized Steel Locks Out Rust and Corrosion
• Single Doors on Front Compartment for Enhanced Resistance to Water and Dust
• Weather Stripping for Dust and Water Resistant Compartment Interiors
• Rain Gutters Above all Doors
• Gas Springs on all Vertical Doors and Chain Stops on Horizontal Doors
• All Compartment Doors are Double Paneled
• Trademarked Recessed Stainless Steel Door Pockets with Internal Fasteners
• Top Lids Have (2) Gas Shocks and (2) Rotary Latches Each Mounted on Lid Ends
• Bright Tread Aluminum Diamond Plate Overlays on Top Lids
• Bright Tread Aluminum Front Gravel Guards and Splash Guards
• Lock-in-place Shelving, Adjustable on 2” Centers
• 13.5” High Self-leveling Tailgate with Shear Resistant Machined Hinges and Protective Stainless Steel Cap
• 12 Gauge Diamond Plate Floor on 10 Gauge Crossmembers
• Composite Fender Flares
• Zinc-plated Hinge Rods with Hinge Blocks
• Lighting Package Installed on Bumper Kick-plate
• 8” Rear Step Bumper
• Removable Trays
• Tie Downs in Bed Area
• Fortress 5-Point Locking System with Zinc Plated Lock Rods
• 1900 Emulsion Undercoating

Touting cargo space matched only by a flatbed, boxes above and below deck, portable trays in the flip-top compartments of the top boxes, and a heavy-duty over-cab ladder rack that is forklift loadable; the contractor body sets the bar high when it comes to versatility. Rain gutters above and weather stripping inside all doors ensure tools and equipment stay protected from the elements. Fold-down gates make it easy to load the bed area without being inconvenienced with loose gates.

The ladder rack comes with Snap-Loc standard on the side rails and heavy-duty rope hooks on rack legs, while the top boxes have D-ring tie-downs on the rear, providing multiple tie-down points to secure loads in the bed and on the rack. With space to secure welders, compressors, generators, or lawn equipment with room to spare; the contractor body is perfect for any number of vocations.

Standard Features

• 42” High, 50/50 punched-steel headboard
• 7” High-profile 10 GA. Side rails w/ Internal stake pockets
• Recessed fuel Pocket
• 4” 11 GA. Cross-members on 16” centers
• Rope Hooks on Cross-members before & aft of rear wheels
• Mud Flaps w/ Anti-sail brackets
• Heavy-Duty Dock bumper
• Powder-coated frame

Landscape Dump Body Standard Equipment
• 42” high Solid Plywood Gates with Wood Uprights on Landscape Dump Body
• Double-acting Hoist raises and lowers the Dump Bed
• Steel Upright Posts and Framing on Rear Hinged Gates
• Heavy Duty Drop Rod Lock on Rear Gates
• Rear Hinged Gates allow easy access to bed area
• Expanded Metal Cab Shield
• Royal Mud flaps

With a 3' Work platform in place of the rear compartment, the Royal combo service body transforms a regular service body into a mobile work station. With removable gates and a variety of options, this body is perfect for the craftsmen who need ample storage and workspace. Rain gutters above and weather stripping inside all doors ensure tools and equipment stay protected from the elements while Ignition key coded, Fortress 5-point locking compartments and internal master lock as an option, provides unprecedented security.

Portable trays in top lids and ergonomic D-shaped handles are highlights of a body engineered with productivity and ease of use in mind. With a heavy-duty, forklift loadable over-cab ladder rack, bamboo slats with stainless-steel posts for the rear platform, and heavy-duty dock bumper as standard features; the Royal combo service body comes equipped to tackle just about any demands.

The last things you need are surprises and expensive add-ons. You have no patience for nickel-and-diming, just like your customers. So Royal Truck Body gives you more standard features than any other service body builder. The kind of commonsense value that respects your hard work and tight margins.

The versatile Royal Stake Bed Body is tough and built with 11 gauge steel cross members on 16” centers for added strength. Easily lift and remove the individual Apitong® panels for loading and unloading. Apitong® has been the traditional wood of choice for flatbed truck flooring where product weight, durability, strength and value are the major concerns.

Standard Stake Bed Features:
• 42” High, 50/50 punched-steel headboard
• 7” High-profile 10 GA. Side rails w/ Internal stake pockets
• Recessed fuel Pocket
• 4” 11 GA. Cross-members on 16” centers
• Three self-tapping screws on wood at each cross member
• Rope Hooks on Cross-members before & aft of rear wheels
• Heavy-Duty dock bumper
• Powder-coated frame
• Apitong® hardwood tongue and groove floor
• Under-bed rope hooks
• 50/50 bulkhead with 14 gauge galvanealed perforated steel top section and solid steel bottom
• Legal light package and reflectors
• Frame construction is 2” x 3” steel tubing
• Mud flaps with Anti-Sail Brackets
• 42” high solid plywood gates with hardwood uprights and grab handles
• 3 year/36,000 mile limited warranty

The stylish ProContractor bed has it all. The ProContractor's unique design is like no other commercial truck. With several Box locations, fold-down sides, optional tool box extenders, and a material rack, this bed really earns it's name. A 30,000# gooseneck hitch is standard. Western style lights in both the bulkhead & tail skirt ensure safe lighting with all loads. Cargo control is a breeze. Standard is a PPG Powder Coat black finish to stand up to the elements.

Standard Features:

• 1/8" TP Deck
• Stake Pockets and Rub Rails
• Plug-In Wire Harness
• Recessed Lights, Body
• Recessed Lights, Bulkhead
• Recessed Tag Well
• GN-Hitch, 30,000 lbs.
• Clear View Window
• Asphalt Undercoating
• Powder Coat Finish

The stylish Rodeo bed has it all. The Rodeo offers that rugged custom look of a western bed, secure pockets & rub rails, 30,000# gooseneck hitch, our Rodeo bulkhead with a full unobstructed rear window, recessed lights, full stop/tail/turn bulkhead lights and a tough but stylish radius tube frame. Standard is a PPG Powder Coat black finish to stand up to the elements. All that style and the quality you have grown to expect from Freedom Truck Beds.

Standard Features
• 1/8" TP Deck
• Stake Pockets & Rub Rails
• Plug-In Wire Harness
• Recessed LED Lights, Body
• Recessed Tag Well
• GN-Hitch, 30,000 lbs.
• 2-5/16" GN Ball w/ 1" Rise
• Dual 7-way Trailer Plugs
• Clear View Window
• Asphalt Undercoating
• Powder Coat Finish

The Workhorse Bed is built to carry the load. The Workhorse design includes structural channel crossmembers & long sills to make this one tough flatbed. The long sill reinforced bulkhead is the toughest in the industry. Other features include recessed lights, quality wire harness, automotive undercoating, all welded floor construction, and inside stake pockets. Standard is a durable PPG Powder Coat black finish. With endless options this bed can be custom built at a price you can afford.

Features:

• Floor: Smooth 11ga. (Std), 3/16", 1/4", & Treadplate 1/8", 3/16", 1/4" & PT Pine, Apitong, Rumber
• Structural Crossmembers: 3"(Std) 4" on 12'-26' HD Bodies
• Crossmember Spacing: 16”(Std), Optional 12"
• Structural channel long rails: 6"(Std), Optional 7", 8"
• Stake Pockets incorporated in floor plate for a smooth side rail
• Gas Fill cut outs, semi-blanked Ford, Chevy Dodge
• 42” Bulkhead with large slotted window, 48" beds 18' & larger (Many Optional Bulkhead styles and sizes)
• 3/16” smooth steel drop center tail skirt w/ recessed LED marker lights
• Bulkhead reinforced to long sills
• Adjustable universal bolt on mud flap brackets
• Asphalt Undercoating
• FMVSS-108 lighting compliant
• Modular wire harness w/ recesses shock mounted LED sealed lamps
• Shot blasted, Zirconium Phosphate & steam pre-treatment
• High Gloss PPG Black Powder Coat Finish
• Complete mounting hardware kit w/ shear plates included

Specifications

• 3-8 Yard Capacity
• 3/16ga. smooth steel floor
• 3” structural channel cross sills on 16” centers
• 6” structural channel long rails
• 40” Bulkhead w/ slotted window
• ¼ Cab Shield, Tarp system ready
• HD Steel Sides w/ formed top rail
• HD Dump Gate, front release
• 3/16” smooth steel tail skirt w/ recessed marker lights
• Adjustable bolt on mud flap brackets
• Modular wire harness w/ recessed shock mounted sealed lamps
• FMVSS-108 lighting compliant
• Asphalt Automotive Undercoating
• Shot blasted, Iron Phosphate & steam pre-treatment
• High Gloss PPG Black Powder Coat Finish
• Complete mounting hardware kit w/ shear plates included